No, they are not the same. Don't know the exact differences in length.
----- Original Message -----
From: "Alex Cherington" <a_flying_scotsman@yahoo.com>
To: <spitfires@autox.team.net>
Sent: Tuesday, June 30, 2009 4:24 AM
Subject: [Spits] Swing Spring
>I am looking at replacing my Mk3 Spitfire spring with a later swing spring.
>I
> have the spring with the cage fitted with new pad and pivot bolt. I have
> fitted a later anti-roll bar. After I built up the spring I tried a stud
> in
> the cage. The stud does not seem very long in that there doesn't seem to
> be a
> lot of thread going into the top of the diff. Does anybody know if the Mk3
> studs are the same length as the MK4 How much of the stud thread should be
> screwed into the diff? Thanks
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Spitfires@autox.team.net
http://autox.team.net/mailman/listinfo/spitfires
http://www.team.net/archive
|