My tonneau (original, I believe) has plain grommets on the front.
But you have
to stretch it a bit to attach them to the pegs,
and it stays on no problem.
My biggest complaint is that the rough bottom of the grommet scratches
the
paint on the air vents...
Doug Braun
'72 Spit
--- On Fri, 5/22/09, Stuart
Greenwood <sagreenwood@att.net> wrote:
> From: Stuart Greenwood
<sagreenwood@att.net>
> Subject: [Spits] Tonneau cover attachment
> To:
spitfires@autox.team.net
> Date: Friday, May 22, 2009, 12:50 AM
> I have an
original factory tonneau
> which at the front has metal eye holes
> where it
slips of the pegs on the top of the dash.
> But it tends to fly off in
> the
wind. To me this can only work if the tonneau is
> a tight fit so the eyes
>
hold fast beneath the lip on the pegs. Is this
> correct or am I missing some
> kind of fastener? Maybe like the ones used on some
> TR2/3s which have a
spring
> clip on each side of the part attached to the tonneau
> so the
spring
> compresses as it slips over the lip on the pegs and then
> snaps
back to grip
> the peg
>
> Stuart a Greenwood
> 71 Mk IV Spitfire, 71Mk 1
Stag
> _______________________________________________
>
> Support Team.Net
http://www.team.net/donate.html
>
> Spitfires@autox.team.net
>
http://autox.team.net/mailman/listinfo/spitfires
>
>
http://www.team.net/archive
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Spitfires@autox.team.net
http://autox.team.net/mailman/listinfo/spitfires
http://www.team.net/archive
|