Stuart,
Based on a hard copy BL parts manual (4/1973), part 624801 appears to be the
black rubber moulding that goes around the underside of the rear deck lip
inside the passenger compartment. This matches the Rimmer online diagram and
what I have in my '71.
My spit's rear deck only has the rubber mounting pads, metal bar and the conv
top attached to the topside of the deck.
Hope this helps
--John
71 MkIV
> Date: Mon, 13 Apr 2009 12:05:56 -0700
> From: sagreenwood@att.net
> To: spitfires@autox.team.net
> Subject: [Spits] rear deck finisher part # 624801 for Mk IV
>
> Until I looked in the catalogues I was not aware that there was such a
thing
> as a rear deck finisher. My car doesn't have one. On the raised edge of the
> rear deck there is (a) a metal plate bolted on which the soft top is
riveted
> to and (b) 8 black plastic studs riveted to the deck edge which engage the
> poppers of the soft top.
> What's the finisher made of? If it goes on the raised edge of the rear deck
it
> must have holes in it to allow the metal plate to be bolted to the deck
> and maybe the black plastic studs hold it on? Can anybody enlighten me on
> this finisher.
>
> Stuart a Greenwood
> 71 Mk IV Spitfire, 71Mk 1 Stag
> _______________________________________________
_________________________________________________________________
Windows Live: Keep your life in sync.
http://windowslive.com/explore?ocid=TXT_TAGLM_WL_allup_1a_explore_042009
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Spitfires@autox.team.net
http://autox.team.net/mailman/listinfo/spitfires
http://www.team.net/archive
|