There is always at least one bolt that rust solid into the front suspension
bushings. I had to cut mine out after trying everything else. I tried using a
vise to push in a new bushing and it bulged and then wouldn't budge in
further. I tried using grease and still only slight movement with a bulge in
the rubber keeping it from going in further.
What is the method to install stock busings back into the upper wishbone?
Thanks,
Rob
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~
This e-mail message from State Compensation Insurance Fund and all attachments
transmitted with it
may be privileged or confidential and protected from disclosure. If you are
not the intended recipient,
you are hereby notified that any dissemination, distribution, copying, or
taking any action based on it
is strictly prohibited and may have legal consequences. If you have received
this e-mail in error,
please notify the sender by reply e-mail and destroy the original message and
all copies.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~~~~~~~~~~
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Spitfires@autox.team.net
http://autox.team.net/mailman/listinfo/spitfires
http://www.team.net/archive
|