spitfires
[Top] [All Lists]

Re: [Spits] Stromberg Vacuum Ports

To: "Spitfires" <spitfires@autox.team.net>, "Berger Bob"
Subject: Re: [Spits] Stromberg Vacuum Ports
From: "Luke Lewis" <superluke@execulink.com>
Date: Sat, 11 Oct 2008 17:28:19 -0400
Check where the port is open to.  If it's open to the inside of the 
butterfly, it has max vacuum at idle.  If the butterfly passes it as it 
opens, it doesn't get vacuum until you're under load.

> All,
>
> The single Stromberg carb I have on my car has the vacuum port on the
> bottom.  Is this a port that will have vacuum at idle? or at speed?
>
> This carb is not original to my car.  The distributor is original and
> I have an original Opus ignition that works, I'm just trying to
> figure out if this vacuum port will work with the stock vacuum retard
> unit.
>
> I currently have this disconnected and the timing set to 10deg Before
> TDC.
>
> Thanks for your help.
>
> Berger Bob
> 78 Spitfire
> St. Louis, MO
> _______________________________________________
>
> Support Team.Net  http://www.team.net/donate.html
>
> Spitfires@autox.team.net
> http://autox.team.net/mailman/listinfo/spitfires
>
> http://www.team.net/archive
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

Spitfires@autox.team.net
http://autox.team.net/mailman/listinfo/spitfires

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>