Hi Larry,
Rimmer Brother lists the 2 braces in there online catalog for about $23
each. Part numbers are 613686 & 613687.
As for sealing the battery box, how about automotive seam sealer? Designed
for the job, and paintable too.
Bill G
Newalla, OK
-----Original Message-----
From: spitfires-bounces+bill=gingerich.us@autox.team.net
[mailto:spitfires-bounces+bill=gingerich.us@autox.team.net] On Behalf Of
Larry Vaughan
Sent: Tuesday, September 16, 2008 9:58 PM
To: spitfires
Subject: [Spits] New battery box
I drilled out all the spotwelds and got my old rusty battery box out. I
drilled a little too far just one or two times. I had planned on
drilling holes around the perimeter of the new battery box and faux
spotwelding it in. Before I drilled any holes and was trial fitting the
box I didn't see how I could seal it after I welded it. I guess thick
paint was all that sealed the old one. I don't know. Anyone have a
better idea of how to install a new battery box? The old braces look
like swisscheese too.
Larry
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Spitfires@autox.team.net
http://autox.team.net/mailman/listinfo/spitfires
http://www.team.net/archive
|