spitfires
[Top] [All Lists]

[Spits] Size of Crank Pully retaining nut.

To: <nass@yahoogroups.com>, <spitfires@autox.team.net>,
Subject: [Spits] Size of Crank Pully retaining nut.
From: "Smith, Brian (CP)" <BrianSmith1@templeinland.com>
Date: Mon, 4 Aug 2008 13:02:24 -0500
Listers,



The subject says it all.  Going to be near a proper tool store today and
would like to buy the correct size first.



Thanks,



Brian Smith

Bogalusa, LA

**********    Confidentiality Notice    **********
This electronic transmission and any attached documents or other writings
 are confidential and are for the sole use of the intended recipient(s)
identified above. This message may contain information that is privileged,
confidential or otherwise protected from disclosure under applicable law.
If the receiver of this information is not the intended recipient, or the
employee, or agent responsible for delivering the information to the
intended recipient, you are hereby notified that any use, reading,
dissemination, distribution, copying or storage of this information is
strictly prohibited. If you have received this information in error, please
notify the sender by return email and delete the electronic transmission,
including all attachments from your system.
_______________________________________________

Support Team.Net  http://www.team.net/donate.html

Spitfires@autox.team.net
http://autox.team.net/mailman/listinfo/spitfires

http://www.team.net/archive

<Prev in Thread] Current Thread [Next in Thread>