Bob,
You might consider what I did on my Mk1 when I had twin SUs on it. I
fabricated a cold air box that mounts over both carbs and fed air into it
through flexible ducts at the front. They were routed to a round air
cleaner that I made up in front of the radiator.
There are photos at this site:
http://members.cox.net/spitlist/Joe'sPage.htm
Joe
-----Original Message-----
From: spitfires-bounces+spitlist=cox.net@autox.team.net
[mailto:spitfires-bounces+spitlist=cox.net@autox.team.net] On Behalf Of Bob
Van Kirk
Sent: Tuesday, March 18, 2008 6:06 PM
To: Clark W. Nicholls; spitfires@autox.team.net
Subject: Re: [Spits] Early Spitty air cleaners
Clark,
Well it looks like I have some learnin to do about
Spitfires. I thought the 1 1/4' where from the euro
model, I stand corrected. I am looking for the single
oval type of housing depicted in the VB catalogue
suitable for MK 1,2,3, it has 2 small round air
cleaners inside of it. So what I meant to say is I
need the entire housing as I have nothing, nadda, zip,
zilch. The only reason is I just like the looks of
this set up better then the cheap chromy things and
and don't like the cost of the K&Ns..
Thanks, Bob
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Spitfires@autox.team.net
http://autox.team.net/mailman/listinfo/spitfires
http://www.team.net/archive
|