Carrera 3323's (adjustable lower spring perches) I measure ground
clearances from the rear lower a-arm inner pivot bolt center line. It's an
easy place to take measurements from. I set all my Spits/GT6's so the
lower a-arms are horizontal to the ground and level.
That put the bolt CL at 6.25" and the frame edge (right in the same place)
at 5"
This is with 175-70 13's
Paul Tegler
ptegler@cablespeed.com
www.teglerizer.com
----- Original Message -----
From: "M D Nugent" <carcentric@yahoo.com>
To: <spitfires@autox.team.net>
Sent: Sunday, November 11, 2007 11:27 PM
Subject: [Spits] Squaretail Spit ground clearance
> If several of you could provide some info, I'd appreciate seeing what the
> range is.
>
> 1. Clearance between front crossmember (just behind the steering rack) and
> the ground.
> 2. Size of front tires.
> 3. If other than stock springs, etc., please note what you're using.
>
> Thanks,
> M D "Doc" Nugent - www.carcentric.com
> Seattle area
_______________________________________________
Support Team.Net http://www.team.net/donate.html
Spitfires@autox.team.net
http://autox.team.net/mailman/listinfo/spitfires
http://www.team.net/archive
|