Hey Guys,
I am in the middle of replaceing shocks/springs/ball
joints on my 1975 Spitfire and I noticed I need to
replace more. My trunions are loose where they attach
to the lower A-Arm. Should I replace the whole trunion
or just the bearings/washers and stuff on the inside
that connects to A-Arm? It looks like I could do that
without removing the Hub but if I replace the whole
trunion (not sure if that is necessary) I would have
to pull the hub off.
Thanks for your help.
Shane Sizemore
Douglasville GA
Tired of spam? Yahoo! Mail has the best spam protection around
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|