Re: Transmission removal project.

[Bill Manning <gripdad@sbcglobal.net>]

Correct. The body of the slave cylinder is indexed so the bolt holds it in 
place even if the nut loosens. Remove the bolt and the cylinder should pull out.
                                            Bill

Doug Braun <doug@dougbraun.com> wrote: I think you have to completely remove 
the bolt before
the cylinder will slide free.

Doug


> The clutch slave cylinder?
> Won't budge(even after loosening pinch bolt), so I
> drained the fluid and removed the hydraulic line.
> Darn, and I just re-bleeded it too this summer. 


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org