Some advice: Practice on something first.
Also, with mineral spirits you can clean
out the tube and valve of the foam spray can
and usually re-use it. Normally they are
good for only one use, because the valve and
tube get all gummed up.
Maybe some entrepreneur will make a half-mold
for the bottom surface of the foam, and they could
place a tunnel cover against it and fill the space
with foam, giving a easier, better looking job...
Doug
--- David <popeye444@comcast.net> wrote:
> Thanks everyone for the great advise and wisdom on
> the insulation. I got
> lots of great ideas that I hadn't considered. I
> think I'm leaning toward
> using the expando foam on the underside of the
> tunnel cover. I like the
> idea of a custom fit and the ability to have a nice
> thick barrier. I have a
> can of it sitting on the shelf that I didn't use
> from a household project.
> Then perhaps the foil colored bubble wrap inside
> under the carpet in other
> places.
>
> David
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|