In the madness several years ago that was my Lucas ignition module failing, I
changed out the coil. I don't know if it's a 6v or 12v coil. It was picked up
at a local auto parts store. On a '79 spit, don't they use 6 volt coils?
I'll take off my current coil and see if there's anything. I might have the
label on it upside-down.
--
http://infaux.net
-------------- Original message ----------------------
From: flinters@ponypics.com
>
>
> The coils should be stamped with the information on it someplace if there
> isn't a label. Beyond that, there isn't really a way to tell which
> voltage a coil is set for. All of our Spits are 12 volt DC, but some
> early models (MK I and MK II were positive ground instead of negative).
>
> Do you suspect you have the wrong coil in the car now?
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|