David,
Wether it's dual or single brake MC, you may find that
a rebuild kit won't do the trick or it might for a
little while & then fail again....ask me how I know.
I'm assuming that they're the same as the TR6. I've
rebuilt a few & boy was I bitter a few weeks later
when it decided to leak again.
As the commercial goes, there's a lot riding on your
brakes.
Personally, I'd have it sleeved OR just buy new.
Cheers,
Todd Bermudez
'67GT6
'68TR250
'74TR6
--- David Mayer <celiracer81@hotmail.com> wrote:
> Hello all,
> I found that my brake master cylinder is leaking.
> I think i will just
> pick up a rebuild kit for it but i am not sure which
> one to get. My master
> cylinder is the one with the large plastic
> reservoir. Isn't that considered
> a later model master cylinder? The car is a '68,
> but weren't those master
> cylinders only fixed to later years? As I am typing
> this, I found an
> auction on Ebay for a rebuild kit for 76-80 master,
> would that work for
> mine?
> Any input on this would be greatly appreciated.
>
> Thanks,
> Dave
Tired of spam? Yahoo! Mail has the best spam protection around
=== This list supported in part by The Vintage Triumph Register
=== http://www.vtr.org
|