spitfires
[Top] [All Lists]

Re: Inlet manifold for a Triumph 4A suitable for a Triumph

To: <ronny.hortlund@allset.se>, <spitfires@autox.team.net>
Subject: Re: Inlet manifold for a Triumph 4A suitable for a Triumph
From: "Nolan Penney" <npenney@mde.state.md.us>
Date: Thu, 27 Oct 2005 08:58:11 -0400
No, it won't fit.  It sorta looks like it will, until you hold a
Spitfire manifold in the other hand and directly compare the two.  The
manifold runner spacing is incompatible, with the Spitfires being closer
together.

-----------------------------------------------------
The information contained in this communication may be confidential, is 
intended only for the use of the recipient named above, and may be legally 
privileged.
If the reader of this message is not the intended recipient, you are hereby 
notified that any dissemination, distribution, or copying of this 
communication, or any of its contents, is strictly prohibited.
If you have received this communication in error, please re-send this 
communication to the sender and delete the original message and any copy of it 
from your computer system. Thank you. 
-----------------------------------------------------
<<<<GWIASIG 0.07>>>>


===  This list supported in part by The Vintage Triumph Register
===     http://www.vtr.org


<Prev in Thread] Current Thread [Next in Thread>
  • Re: Inlet manifold for a Triumph 4A suitable for a Triumph, Nolan Penney <=