> <ptegler@cablespeed.com> 01/21/05 12:43PM >>>
>although a bit tedious perhaps... a standard front strut
>style compressor will work.
Well, that's kinda yes and no. One like yours will work. But the
generic cast units with the two fingered claws will not. This one for
example will not fit.
http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=3980.
This type hits the shock and gouges it deeply. They also have problems
closing enough because of how far away from the perches you have to be
to get the fat fingers in there. And then there's the way the generic
ones get crossed up as you compress the spring.
Where did you get yours btw?
http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=43753
doesn't fit either. I've got one and tried it. It fouls the shock as
well.
-----------------------------------------------------
The information contained in this communication may be confidential, is
intended only for the use of the recipient named above, and may be legally
privileged.
If the reader of this message is not the intended recipient, you are hereby
notified that any dissemination, distribution, or copying of this
communication, or any of its contents, is strictly prohibited.
If you have received this communication in error, please re-send this
communication to the sender and delete the original message and any copy of it
from your computer system. Thank you.
-----------------------------------------------------
<<<<GWIASIG 0.07>>>>
|