Did your new harness have a fuse block attached? If not, how did you deal with
the fuse block?
doug Braun
'72 Spit
At 02:22 PM 9/30/2004 -0700, you wrote:
>I put a whole new harness in mine, I think about $300, and a couple of days
>work. Well worthwhile. It sounds like yours is like mine was, about at
>the end of it's life. The new harnesses are all color coded, you just cut
>the old one, leaving an inch or two of each wire+connector at all the
>gauges, lights etc. Then when the old one is in you just swap the old plug
>for the new, with a little cleaning up of the connections for good measure.
>When I tested mine the first time there wasn't a single short anywhere.
|