7/16-20 threads. I used stainless steel set screws I bought from
McMaster-Carr (www.mcmaster.com) on my '79 Midget engine.
-=Chris
Chris King
http://home.comcast.net/~kvcbk/
<-----Original Message----->
From: ZoboHerald@aol.com
Sent: 7/3/2004 10:23:20 PM
To: spitfires@autox.team.net;tumark@excite.com
Cc: nass@yahoogroups.com
Subject: Re: spitfire
This message came to me. If anyone can help, please reply to
_tumark@excite.com_ (mailto:tumark@excite.com) , NOT to me. Thanks! --
Andy Mace
In a message dated 7/2/2004 11:31:28 PM Eastern Daylight Time,
tumark@excite.com writes:
looking for info on removing the airrail and smog pump, specifically
what
size threads are required for plugging the holes in the head.
|