For reference... the # is the thread size
3824 is 3/8" 24tpi. Now whether that
number fits your calipers is a whole 'nother
bailiwick.
Paul Tegler
ptegler@cablespeed.com
www.teglerizer.com
----- Original Message -----
From: "Richard Gosling" <richard.gosling@exprogroup.com>
To: "'Kashif Ahmad'" <KASHIF@RCP.co.uk>; <spitfires@autox.team.net>
Sent: Friday, April 04, 2003 9:54 AM
Subject: RE: It is a long shot - bleed screw sizes and speedbleeders.
> Kashif,
>
> On the advice of another list member, I ordered:
>
> Front calipers SB3824L
> Rear cylinders SB3824HD
>
> which fitted just fine.
>
> Apparently the guys at Speedbleeder are quite helpful, and very happy to
> discuss with you which of their sizes would work best. I guess you'll
need
> to tell them thread size and length so they can identify what you need.
If
> you still have the original calipers, try fitting the bleed nipples from
> those to your Princess calipers - if they fit then you know you can just
> order the same Speedbleeders as for normal Spit calipers.
>
> Richard & Daffy
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|