Doug, I'll second that. That's my setup. Only could get a set of short bars as
well.
Alan
-----Original Message-----
From: "spitfires-owner@autox.team.net" <spitfires-owner@autox.team.net> on
behalf of "Douglas Braun" <doug@dougbraun.com>
Sent: Tue, 12 Nov 2002 22:27:07 -0500
To: "Sam Gentry" <sam@spit6.com>, "Rick Gregory" <Rick@ncmg.com>,
"Spitfires Autox. Team. Net \(E-mail\)" <spitfires@autox.team.net>
Subject: Re: Hardware for hardtop
At 07:21 PM 11/12/02 -0500, Sam Gentry wrote:
>There is a long set of bars for sale on Ebay.
>
>Sam
I found a cheaper way to mount the hardtop with the more common short bars with
the soft-top removed: Get a pair of 5/16-24 bolts that are 3 1/2 inches long.
Attach the bottom holes of the bars to the top screw hole on the inside of
the body where the soft top mounts. Then the 3 1/2" blots will reach from
the black castings on the hardtop down to the bars. It's not as pretty
as the proper long bars, but it gets the job done.
Doug Braun
'72 Spit
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|