Joe- the sketched one on ebay looks an awful lot like the TSSC model I have-
http://www.bigolbear.com/pullers.htm
"Any drive you don't return from on a tow truck was a good one..."
Jon
'77 (mostly) 1500 "Ol' Yeller"
FM66043 7U
Nass #104
www.bigolbear.com
-----Original Message-----
From: spitfires-owner@autox.team.net
[mailto:spitfires-owner@autox.team.net]On Behalf Of ptegler@cablespeed
Sent: Thursday, October 31, 2002 12:00 AM
To: Joe Curry; Spitfire Internet Mail List
Subject: Re: Spitfire Hub Puller on EBAY
Joe... no this is NOT a true 'Churchill version.
The Churchill unit is a round bodied device (like a top hat)
with an ear off the side to insert a 'stop rod'
in to use as a handle to counter the torque is used
'on the car' rather than axle off the car.
This unit I believe is designed for a Lotus (same
bolt circle and center hub size) and the metal
is MUCH heavier. I have one of this style
puller. (as well as another)
You can mount the axle in the puller, then
put the puller in the jaws of a bench vise,
eliminating the need to torque the axle shaft (axle
in the vise) when trying to turn the screw.
The screw threads in the main body are a replaceable
hub, inside the main body. Quite heavy duty.
Paul Tegler
ptegler@cablespeed.com
www.teglerizer.com
----- Original Message -----
From: "Joe Curry" <Spitlist@gte.net>
To: "Spitfire Internet Mail List" <spitfires@autox.team.net>
Sent: Wednesday, October 30, 2002 11:47 PM
Subject: Spitfire Hub Puller on EBAY
> Does anyone know the person selling the above item? He is identified as
> Lotus907.
>
> Since no photo (only a sketch) is provided, I need to determine if this
> is a REAL Churchill tool and not one of the copies that are being sold.
>
> Regards,
> Joe
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
/// Archives at http://www.team.net/archive
|