spitfires
[Top] [All Lists]

LED and valve cleaner

To: <spitfires@autox.team.net>
Subject: LED and valve cleaner
From: <ralemen@cableone.net>
Date: Fri, 9 Aug 2002 12:37:22 -0700
Rick, I went 510 ohm (not k) 1/4 W to be on the safe side. It's a 6000 mcd high 
intensity white LED.  Normal green ones are nowhere near bright enough. Though 
I believe you can get some high intensity ones now. I used it on my new 
combined oil pressure/temp gauge. It came without any coloured filter to make 
the light green and was extremely dim with the standard 2w so I tried 4w and it 
was OK (for light intensity) but far too hot for the plastic filter I made from 
office index file tabs ( just about the right shade of green, cheap and 
available). I stuck my LED torch (flashlight I believe you call it) round the 
back and that looked not bad, hence why I went this way.

LED is 3.6v, 20 mA nominal so I thought - lights are only on when the engine is 
running  - so it's at the charging voltage, hence I want to drop about 10V - 
11V -> 500 ohm- 550 ohm. 11v, 20mA ->220 mw hence the 1/4W rating and it's also 
small enough to fit inside the old bulb base. It cames out pretty neat for a 
first try.

 
I was asking about the valve cleaner, since like you am am worried about the 
side-effects.


Alan

-----Original Message-----
From:   "spitfires-owner@autox.team.net" <spitfires-owner@autox.team.net> on 
behalf of  "Rick Gregory" <Rick@ncmg.com>
Sent:   Fri, 9 Aug 2002 11:13:20 -0600 
To:     "'ralemen@cableone.net'" <ralemen@cableone.net>, 
"'spitfires@autox.team.net'" <spitfires@autox.team.net>
Subject:        RE: Where did everyone go ?

Is that a standard LED & 470(K?) ohm resistor, or did you use something
else? What did you use it for - an "on" indicator or something else? I have
been thinking it would be nice to have a pair of these for left & right turn
signal indicators, & maybe use the existing one for something else, or not
at all.

Never used the valve cleaner products - always been to scared to mess with
things like that for fear of bad side-effects. I would love to hear of an
objective review and ratings of these kinds of products from serious and
thorough evaluations.

Rick Gregory
'74 Spitfire FM15447UO
Great Falls, Montana 
http://ww.spitfire.gregory.net

///  spitfires@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool
///  Archives at http://www.team.net/archive


<Prev in Thread] Current Thread [Next in Thread>
  • LED and valve cleaner, ralemen <=