Richard, My memory says the same. Gear oil at the front and grease at the back
etc. That's what's in mine.
Alan
-----Original Message-----
From: "spitfires-owner@autox.team.net" <spitfires-owner@autox.team.net> on
behalf of "Richard Gosling" <richard.gosling@exprogroup.com>
Sent: Fri, 15 Feb 2002 15:47:06 -0000
To: "'Carter Shore'" <clshore@yahoo.com>, "Richard Gosling"
<richard.gosling@exprogroup.com>, "'Dean Dashwood'"
<deandashwood_list@yahoo.co.uk>, "Spitfire List" <spitfires@autox.team.net>
Subject: RE: Rear-end rubbing advice please!
Carter,
I may be wrong - my understanding was that you should use gear oil in the
Front Trunnions, to lubricate the rotation of the trunnion when the steering
is operated.
Everywhere else (rear bearings, steering rack, UJs etc.) you use normal
grease.
If anyone can confirm for sure that you also use oil in the rear bearings
please let me know! I haven't got any of my manuals to hand to check in.
Richard
----------------------------------------------------------------------
Important Notice:
The information in this email is confidential and may be legally-privileged.
If you have reason to believe you are not the intended recipient, any
disclosure,
copying, distribution or any action taken or omitted to be taken in reliance on
it is prohibited and may be unlawful and you are requested to contact the sender
urgently and dispose of this email
-----------------------------------------------------------exp.
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
|