Building a low fuel warning light circuit is actually easier than the lights
on alarm. It's a simple voltage comparitor circuit(comparing the fuel
tanker sender output to a preset one obtained by draining the fuel tank and
putting one gallon back in it. Turn a variable resistor until the light
comes on and there you are).
Pat
> -----Original Message-----
> From: St.John, Kenneth [SMTP:ken.stjohn@hexcel.com]
> Sent: Tuesday, January 22, 2002 6:00 PM
> To: 'James Carruthers'; Spitfire Bulletin Board (E-mail)
> Subject: RE: lights on alarm x-mac-creator="4D4F5353"
>
> Luckily - it's an easy car to push start, unless you run out of gas
> because
> your guage doesn't work!
>
> Good luck,
> Ken St.John
>
***********************************************************************************************************
Nissan Technical Centre Europe Limited.
Registered in England Number 2228415 Registered Office Cranfield Technology
Park, Moulsoe Road, Cranfield, Bedfordshire MK43 0DB
Telephone : +44 (1234) 75 5555
This e-mail and any files transmitted with it are confidential and intended for
the addressee only. If you are not the addressee you may not copy, forward,
disclose or otherwise use it, or any part of it, in any form whatsoever. If
you have received this e-mail in error please notify the sender and ensure that
all copies of this e-mail and any files transmitted with it are deleted.
Any views or opinions represented in this e-mail are solely those of the author
and do not necessarily represent those of Nissan or its affiliate companies.
Although this e-mail and its attachments have been scanned for the presence of
computer viruses, Nissan will not be liable for any losses as a result of any
viruses being passed on.
***********************************************************************************************************
/// spitfires@autox.team.net mailing list
/// or try http://www.team.net/cgi-bin/majorcool
|