spitfires
[Top] [All Lists]

Re: Leaking Oil behind the head - photo and tips

To: "Joe Curry" <spitlist@gte.net>, "Vic Whitmore" <vicwhit@rogers.com>
Subject: Re: Leaking Oil behind the head - photo and tips
From: Paul Tegler <ptegler@cablespeed.com>
Date: Mon, 3 Dec 2001 19:23:32 -0500
http://www.teglerizer.com/triumphstuff/75w_engine_cylinders.
htm
3/4th of the way down the page... Permatex Copper Coat
gasket dressing on the cylinder block and head.

Paul Tegler
ptegler@cablespeed.com
www.teglerizer.com



----- Original Message -----
From: "Joe Curry" <spitlist@gte.net>
To: "Vic Whitmore" <vicwhit@rogers.com>
Cc: "Greg Schluge" <gschluge@cstone.net>; "Spitfires
Maillist" <spitfires@autox.team.net>
Sent: Monday, December 03, 2001 3:24 PM
Subject: Re: Leaking Oil behind the head


> I typically use "Copper Kote" or some variant of that
spray on substance.  It may not actually do any thing (I
hope it helps to seal the casket) but
> in the worst case, it certainly can't hurt!
>
> Joe

///  spitfires@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool


<Prev in Thread] Current Thread [Next in Thread>
  • Re: Leaking Oil behind the head - photo and tips, Paul Tegler <=