spitfires
[Top] [All Lists]

Re: Unfortunate news -

To: <triumphs@autox.team.net>, <bschwart@pacbell.net>
Subject: Re: Unfortunate news -
From: "Nolan Penney" <npenney@mde.state.md.us>
Date: Thu, 27 Sep 2001 09:48:52 -0400
In a nutshell, no you cannot tell piston condition without removing the piston. 
 
I've pulled pistons from engines that had seized where the bore looked fine,
but the piston was well smeared.  Both at the skirts, and over various rings.

You could gamble that everything is ok, but it is a gamble.  I've taken that
gamble myself on engines.  Sometimes I got away with it, sometimes I didn't.

///  spitfires@autox.team.net mailing list
///  or try  http://www.team.net/cgi-bin/majorcool


<Prev in Thread] Current Thread [Next in Thread>