Re: Looking for Drive Resister

["Gwen Harris" <gharris@rochester.rr.com>]

Bob,
         The drive resister is part of the ignition system and I believe the
stock location is off of a bracket that holds a valve from the air injection
system,and is bolted to the dist. it has a wire at both ends(one side is 2
wires into 1 connector) It is approx.2" long and 3/4square.it is an anodised
gold finish. However,if the ignition has been changed from the orig.(Lucas
opis) it may not be there.

                                                  Good Luck,
                                                   Bob Harris

///  spitfires@autox.team.net mailing list
///  To unsubscribe send a plain text message to majordomo@autox.team.net
///  with nothing in it but
///
///     unsubscribe spitfires
///