As y'all have read I had a bad gear in my Stag Tranny
The OD never did work. I was going to replace the solenoid first then
everything I could get at without pulling the trans. Well since my tranny is
broke anyway, I pulled it and disassembled the OD. I found a oring on one of
the pistons that was split, no wonder the OD did not work, it couldn't hold
pressure.
I would have replaced everything on the OD that I could and still would have
pulled the tranny.
Not good that I have a bad gear, but I also did not waste a lot of time and
money.
THnx
Pat
63 Spitfire
68 Chevy C10
71 Stag
74 Spitfire
http://spitfires.iwarp.com
///
/// spitfires@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe spitfires
///
///
|