I painted mine the same color as the car and left them that way. It gives a
touch of color to the inside and I've gotten quite a fiew good comments
about it.
Tod Jones
Harrisonburg VA.
67 Spit Mk II
72 MGB
----- Original Message -----
From: "Flinthoof Ponypal" <Flinters@picarefy.com>
To: "Daniel L Parrott" <parrotthead01@home.com>; "Barry Schwartz"
<bschwart@pacbell.net>; <triumphs@autox.team.net>
Cc: <spitfires@autox.team.net>
Sent: Tuesday, May 08, 2001 1:53 PM
Subject: Door cappers
>
> I think I'd be tempted to glue down a 1/4" layer of foam rubber first and
> then a layer of vinyl glued to that. Since the top edge would end at the
> window felts and the bottom by the door panel, it should be a fairly clean
> installation. The exposed edges at the door jambs could be cleaned up by
> simply folding under the last 1/8" or so and gluing it all into place.
You
> would end up with slightly cushioned door caps. That's what I'll likely
do.
>
> -Vegaman Dan
///
/// spitfires@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe spitfires
///
///
|