I've had a similar problem with U-Haul harness, except
2 adjacent wires, just where they enter the molded
assembly, were shorting through the insulation. (I had
to disassemble it to satisfy my curiousity). This due
to repeated flexure I surmise.
Carter
--- Nolan Penney <npenney@mde.state.md.us> wrote:
>
> Surprise, but my U-Haul trailer harness had failed.
> The diodes had apparently shorted it its magical
> black box, allowing a heavy current drain. Not so
> heavy as a wire solidly grounded out, but heavy
> enough to screw around with my lights and
> occassionally blow the fuse. Not untill the damage
> got bad enough to start a fire was I able to locate
> it.
Get email at your own domain with Yahoo! Mail.
http://personal.mail.yahoo.com/
///
/// spitfires@autox.team.net mailing list
/// To unsubscribe send a plain text message to majordomo@autox.team.net
/// with nothing in it but
///
/// unsubscribe spitfires
///
///
|