Jason,
Mine do have cracks and on one side half of the weld to the frame is broken
loose. If anything, I'll just weld up the cracks and maybe add a strip of
metal with proper holes. I'll check out JC Whitney first though.
Thanks,
Mike
----- Original Message -----
From: "J Constantino" <jjcon2@yahoo.com>
To: <mikeross@Prodigy.net>
Cc: <spitfires@autox.team.net>
Sent: Saturday, April 07, 2001 11:10 PM
Subject: Larger anti roll bar
> Mike:
>
> In the JC Whit catalog, they sell polyurethane sway
> bar bushings with new u shaped brackets to go over the
> bushings. The u brackets have slotted holes and come
> in two sizes to match your frame hole pattern.
>
> Don't cut your frame mounting plates off (but do check
> them for cracks, mine had some...)
>
> Jason
> GT6
>
> -----------------------------------------------------
> Subject:
>
> Has anyone put a larger anti roll bar on their
> Spitfire or GT6 and
> found they had to refabricate the mounting plate onto
> which it
> attaches to the frame? I just checked mine and find
> that the mounting
> bracket bolt holes are spaced too far apart to use the
> stock mounting
> plate on the frame. Before cutting the old plates off
> and welding on
> new ones, I thought I'd ask for input from anyone
> who's already done
> this.
>
> TIA,
>
> Mike Ross
> Get email at your own domain with Yahoo! Mail.
> http://personal.mail.yahoo.com/
|