> -----Original Message-----
> From: Ron & Susan [mailto:rroach@direct.ca]
> Sent: Thursday, December 07, 2000 9:15 AM
> To: spitfires
> Subject: Re: speedo cable
>
>
>
> Thanks Richard. I'll keep investigating this. The speedo
> worked for a
> little while until I kicked it in, then shortly after that it
> konked out.
> This happened to the mechanic as well, but he thought he had
> it fixed....
>
> Ron
>
> Vancouver
>
Just a thought, you say that you have a MG right angle adapter?
Is it possible that the MG adapter is not getting the correct
bite in the transmission? It does for a little bit, but doesn't
maintain it. For example, either the end of the speedo cable
isn't long enough to fully seat in the adapter, or the adapter
end isn't long enough to fully seat in the trans?
Hope this helps, or at least gives you a direction.
Cheers,
Doug
--
Doug Mitchell
mailto:dbmitch@peoplepc.com
'73 Spitfire 1500
|