spitfires
[Top] [All Lists]

RE: Weber DGV Problems pics of DGV

To: Spitfires Maillist <spitfires@autox.team.net>
Subject: RE: Weber DGV Problems pics of DGV
From: "Simmons, Reid W" <reid.w.simmons@intel.com>
Date: Wed, 23 Aug 2000 17:04:45 -0700
>From what I remember of it my manifold was straight, which would explain why
the air cleaner was "too tall" to fit under the hood properly.  When I got
my Weber (~1983) I don't think the drop down manifold was available for a
Spitfire.

BTW as I recall the whole Weber conversion kit was something like $175,
which was probably more money back in 1983 then the $339.95 that the kit
costs today.

Reid
'79 Spitfire (original owner)


-----Original Message-----
From: Vic Whitmore [mailto:vicwhit@home.com]
Sent: Wednesday, August 23, 2000 1:58 PM
To: Ptegler
Cc: Nolan Penney; Spitfires Maillist
Subject: Re: Weber DGV Problems pics of DGV



My manifold is a Cannon but it is almost straight. That sure explains a lot.
What type of manifold is in the pic?

Vic W.

Ptegler wrote:
> 
> take a look at the DGV installation in the photos at
> http://www.teglerizer.com/triumphstuff/bs_engine.htm
> Does your manifold drop down like this one?
> or it straight?
> 
> Paul Tegler   wizardz@toad.net        http://www.teglerizer.com
> 
> ----- Original Message -----
> From: "Vic Whitmore" <vicwhit@home.com>
> To: "Nolan Penney" <npenney@mde.state.md.us>; "Spitfires Maillist"
<spitfires@autox.team.net>
> Sent: Wednesday, August 23, 2000 4:16 PM
> Subject: Re: Weber DGV Problems
> 
> Thanks, Nolan. I agree with you that it must be something like the engine
> mounts. Mine are relatively new as they were replaced two years ago so
they have
> very little sag.
> 
> I looked through a K&N product catalog and could not find a filter for the
DGV
> that is thinner than 1 7/8 inches. I'll have to do some scouting and maybe
> cobble something that will fit the profile. I really would like to keep
the
> Weber on.
> 
> Vic W.
> 
> Nolan Penney wrote:
> >
> > Check very carefully for interference with the exhaust manifold.  It
took me a little while to find where one of
> > the casting bumps on my 1980 exhaust manifold fouled the intake manifold
for my SU's.
> >
> > Yes, there is an alternative low profile air filter assembly for the DGV
so that it can fit under tight areas like
> > a Spitfire.  I believe it's a K&N unit, though I don't recall
specifically.
> >
> > One can often times spot the downdraft weber equipped Spitfire by the
outward bulging dent in the bonnet.
> > Some have it worse then others.  I suspect that it has a great deal to
do with the motor mounts.  Between
> > how low they let the engine sit, and how much they let it rock.


<Prev in Thread] Current Thread [Next in Thread>