Re: cut-off switch subject change (sparks)

["Graham Stretch" <technical@iwnet.screaming.net>]

Hi Paul
Another good one for sparks etc is the metal watch band across the hot
terminal to ground or to the starter terminal on the solenoid, BTDT, had a
circular burn round my wrist so be warned, make sure the rubber boots are
intact on the hot terminals on the starter circuit!!!

Graham.

----- Original Message -----
From: Mostrom, Paul <Mostrom.Paul@principal.com>
The sparks are quite impressive if you ground your wrench to the body while
loosening up the hot terminal.