In a message dated 12/16/99 3:48:13 PM Central Standard Time, gt6plus@gis.net
writes:
<<
Any ideas how it drop out of sync like this, >>
Hi Tom,
My GT6 (standard Strombergs) was suddenly and inexplicably dropping out of
sync as well. I discovered that the set screw for the needle (the one on the
piston, not the one in the bowl) was loose and the needle would drop out of
the piston a little sometimes, effectively leaning the setting WAY out. When
it popped back in, the problem would go away. Strangest effect, since it was
intermittent -- was driving me nuts. You might try checking that set screw
on the front carb to see if it's tight.
Scott Barr
72 GT6 (soon to lose the ZSs and sprout 3 Webers!)
|