In a message dated 11/10/1999 6:41:32 PM Eastern Standard Time,
tgordon@saginaw-city.k12.mi.us writes:
> My current thinking is
> to use a 50mm cutting wheel in a die grinder and cut through the threaded
> portion between the nut and upper boss of the vertical link (there is a
> 3-4mm gap so I have enough room), but would really like to find an easier
> answer, if it exists.
or a sawzall...
or a nut splitter to break the nut off...
Clark W. Nicholls
CWNicholls@aol.com
http://members.aol.com/CWNicholls
fax: 419-844-7564 (yes, 419)
phone: 413-243-3433
|