Hi Tom:
About 6 years ago I bought a Lincoln SP-100 MIG welder. It works great.
It runs about 100 amps. Plenty of power for stuff up to 1/4 inch but can
be reduced to handle auto sheet metal with no problem. I use it with gas
or with Lincoln's "Innershield" wire without gas. It has a 30% duty
cycle but I have never had it shutdown. It's quiet, a very professional,
overbuilt unit. I think it was around $700.00 through Sears.
Hope this helps.
Jerry Judge
Jupiter, Florida
Tom Shirley wrote:
>
> I'm in the market for a MIG welder. I already have a Lincoln with the MIG
> conversion, but it's only a 2 position 70 amp rig. Not enough power for big
> applications. I'd like to get something that has variable power setting but
> not the 4 or 6 position knob. Something with a rheostat for infinite power
> selection. I'd like something around 120 to 150 amps.
>
> So, the usual questions.
>
> What brand, how much, where can I get it, etc., etc.
>
> Tom Shirley Sale Creek, TN
> 1982 Royale RP31M Formula Ford (BAD DOG Racing)
> 1978 Triumph Spitfire
> http://www.Geocities.com/MotorCity/Speedway/1080
|