spitfires
[Top] [All Lists]

Re: 3.27 GT6 Differential

To: Joe Curry <spitlist@gte.net>
Subject: Re: 3.27 GT6 Differential
From: Ted Schumacher <tedtsimx@q1.net>
Date: Sat, 21 Aug 1999 22:38:43 -0400
Joe Curry wrote:
> 
> After posting a question regarding 4.11 gears for a GT6 differential, I
> got several replies from people interested in obtaining the 3.27
> differential I have.
> 
> Because of this interest coupled with the fact that I have absolutely no
> idea what to ask for the thing, I am therefore putting the thing up for
> bids.
> 
> Here is a description:
> 
> GT6 differential, 3.27:1 ratio, 6 bolt spring adaptation, large flanges
> 
> The thing turns smoothly and the gears show no sign of wear, although
> there was a bit of surface rust on a few of the crown teeth due to the
> thing sitting for a period without any oil.  However, Soaking in Marvel
> Mystery oil and using 1000 grit sand paper cleaned it all off.  Al that
> remains is a dark place where the rust was.  I expect after a few
> hundred revolutions, they will be as polished as the rest of them.
> 
> All the bearings turn smoothly and the seals do not appear to leak,
> however, as with all used differentials, you might want to replace at
> least the stub axle bearings prior to installing it just to be sure.
> 
> Please send all offers "OFF LIST" as to not take up unnecessary
> bandwidth.
> 
> Regards,
> Joe Curry
> 
> P.S.  The Differential is in The Tucson, AZ area and shipping will have
> to be the responsibility of the buyer.
> 
> --
> "If you can't excel with talent, triumph with effort."
>  -- Dave Weinbaum in National Enquirer
joe, if you don't sell them yours, sell the ones we have. ted
-- 
Ted Schumacher  
TS Imported Automotive
404 Basinger Rd.
Pandora, Ohio, USA 45877
Ph. 800/543-6648  USA/Canada  FAX 419/384-3272 24 hour
Ph. 419/384-3022 - tech./general information
Web page http://www.tsimportedautomotive.com
New-Used-Rebuilt-NOS-Performance British car parts.
200 - 300 parts cars in our British-only salvage yard.

<Prev in Thread] Current Thread [Next in Thread>