>Never had one problem with Rimmers, in fact they in my opinion are one of
>the best period, albight a little expensive
Ditto, but I would also like to add, the parts you get from them are
expensive for the quality. But not expensive if you know what I mean, the
rear spring I got from them was not finised very well, but they needed to
charge almose 1/2 as much as they do and make orignial quality Spitfire
springs.
My one complaint about all parts supplyers is you order a part and get a
cheap remanifacture for the advertised part, rather than a more expensive
part that would actualy last and do the job. UJ's, other suspension parts
and heater pipes are good example, the new pipes I got have cracked after
only a year!
It's down to people to insist on better quality, the hassel of sending
somthing back is a lot less than replaceing a poor quality part when it
prematurly fails.
James
|