spitfires
[Top] [All Lists]

RE: Smog / was BHP ?

To: "'Peter S.'" <alfapete@pacbell.net>, wizardz <wizardz@maxinter.net>,
Subject: RE: Smog / was BHP ?
From: Craig Smith <CraigS@iewc.com>
Date: Thu, 29 Jul 1999 12:46:46 -0500
Thank GOD I live in SC
I would wind up on the news cause I shot somebody


-----Original Message-----
From: Peter S. [mailto:alfapete@pacbell.net]
Sent: Thursday, July 29, 1999 12:38 PM
To: wizardz; Laura Gharazeddine; Craig Smith; Terry L. Thompson;
spitfires@autox.team.net
Subject: Smog / was BHP ?


In California (probably the strictest smog laws in the world) you must have
the original carb as fitted new.  Headers on most cars is illegal too
depending on its age and need for EGR etc.  An engine conversion to
something else altogether is possible but the car then basically becomes
what the engine came from.  Put in a Corvette 350 and the car gets smogged
as a Corvette of the year of the engine - plus lots and lots of red tape.
If you can stomach it go to this site for more info
http://www.smogcheck.org/


Peter S




----- Original Message -----
From: wizardz <wizardz@maxinter.net>
To: Peter S. <alfapete@pacbell.net>; Laura Gharazeddine <Laura.G@141.com>;
Craig Smith <CraigS@iewc.com>; Terry L. Thompson <tlt@digex.net>;
<spitfires@autox.team.net>
Sent: Thursday, July 29, 1999 10:26 AM
Subject: Re: BHP ?


> It all depends on how it's been jetted.
> Mine was re-jetted...way back when...for more power,
> air correctors and mains were both changed. (what the numbers are
> off hand..i don't remember)
> simply leaning it out..it  DOES (can) pass MD state insp.....even though
I'm not required
> to.  (More than twenty years old)
>
> Paul Tegler
> 1973 BGT - Daily Driver
> 1975 Spitfire -in Cherry Shape     1980 Spitfire  w/  O/D - in re-hab
> email: wizardz@toad.net        http://www.teglerizer.com
> (all new ..faster menu)
>
> -----Original Message-----
> From: Peter S. <alfapete@pacbell.net>
> To: Laura Gharazeddine <Laura.G@141.com>; Craig Smith <CraigS@iewc.com>;
Terry L. Thompson <tlt@digex.net>; spitfires@autox.team.net
<spitfires@autox.team.net>
> Date: Thursday, July 29, 1999 1:21 PM
> Subject: Re: BHP ?
>
>
>
> But unlike you're arrangement, most of us have to pass some sort of Smog
> test - which wouldn't pass with a Weber.
> PS
>
>
>
> ----- Original Message -----
> From: Laura Gharazeddine <Laura.G@141.com>
> To: Craig Smith <CraigS@iewc.com>; Terry L. Thompson <tlt@digex.net>;
> <spitfires@autox.team.net>
> Sent: Thursday, July 29, 1999 8:43 AM
> Subject: Re: BHP ?
>
>
> >
> > Get rid of the Strom-it's slowin' you down, man! (besides-they're
> > such a pain!)
> >
> > Really, my other spittys had the stock strom-I hated those!@#$ things!
> > The Weber is so much easier to live with!
> >
> > LG and Nigel
> > ----- Original Message -----
> > From: Craig Smith <CraigS@iewc.com>
> > To: <Laura.G@141.com>; Terry L. Thompson <tlt@digex.net>;
> > <spitfires@autox.team.net>
> > Sent: Thursday, July 29, 1999 8:36 AM
> > Subject: RE: BHP ?
> >
> >
> > > Ok, I believe...
> > > I have a question.
> > > A stock MKIV
> > > Head shaved .020
> > > Valve job new rings, bearings
> > > Long Flow header
> > > Balanced Crank and Pistons
> > > Stock Strom.
> > > HP ???
> > >
> > >
> > > -----Original Message-----
> > > From: Laura.G@141.com [mailto:Laura.G@141.com]
> > > Sent: Thursday, July 29, 1999 10:25 AM
> > > To: Terry L. Thompson; spitfires@autox.team.net
> > > Subject: Re: BHP ?
> > >
> > >
> > >
> > >
> > > > has anyone heard of a 1500cc Spit engine being brought above 100 hp?
> > > > (I know a twin SU equiped spit is rated at 71 bhp without catalyst.)
> > >
> > > Yes. When the engine on my car was being rebuilt, the PO had the
> intention
> > > of
> > > racing it-so....it was tweaked. Remember-F1 engines used to be
1500-it's
> > > not the size-it's the skill of the mechanic!
> > >
> > > The engine was completely taken apart. A lot of time and effort was
put
> > into
> > > putting it back together. (Remember-he does this for a living-and he
> used
> > to
> > > build
> > > race cars-) Combined with the headers and side draft Weber...Oil
> > cooler...I
> > > mean
> > > every little detail. It's a very fast car. And there haven't been any
> > engine
> > > problems-
> > > and I drive it hard. But, he and his son took it out to test it when
> they
> > > finished-to see if
> > > he could "break" it-and he couldn't (and he drove it REALLY hard!)-it
> > > redlines up
> > > around 9500.
> > >
> > > I know that no one on the list believes me-so, I won't even go into
the
> > > datails-
> > > the answer to your question is emphatically YES-given the time, skill
> and
> > > money-
> > > YES!
> > >
> > > Laura G. and Nigel
> > >
> > >
> > >
> > >
> > > > The reason I'm asking is that since an engine swap for another
engine
> > > (289?
> > > > 302?)
> > > > is a very daunting task, requiring mods for frame, body, drive-train
> and
> > > > suspension,
> > > > I'm wondering how effective it would be to have another Spit engine
> > built
> > > > up with
> > > > performance cam, dual point distributor, roller rocker, tubular push
> > rods,
> > > > competition valves, dual valve springs, etc. (I'm specing the cost,
> and
> > it
> > > > seems
> > > > a lot more reasonable to do than to modify the car with a larger
> foreign
> > > > block and
> > > > drive train.)
> > > >
> > > > Terry L. Thompson
> > > > '76 Spit 1500
> > > > Maryland
> > > >
> > > >
> > > >
> > >
> >
>

<Prev in Thread] Current Thread [Next in Thread>