Surely you'd need to modify the propshaft too? Or are they the same?
>----------
>From: Ted Schumacher[SMTP:tedtsimx@q1.net]
>Sent: 16 June 1999 16:18
>To: nikolai jaremka
>Cc: spitfires@autox.team.net
>Subject: Re: gearbox conversion
>
>
>you use the spit bellhousing. cut about 3/4" from the input shaft so it
>si the same length as the spit. we supply a clutch disc with the
>correct spline for the gt6 and a spitfire diameter. ted
>
>nikolai jaremka wrote:
>
>> i was doing some investigating last night and was wondering
>> this:
>> if i wanted to convert my spitfire to a GT6 gearbox for the
>> close ratio gearing, what would i need other than the gearbox
>> (less bellhousing), flywheel, and clutch assembly? could i get
>> away with using the spitfire bellhousing and associated clutch
>> components along with the GT6 clutch and pressure plate? would
>> i also need to modify my drive shaft in any way? what do you
>> guys/gals think?
>>
>> ===
>> nikolai jaremka
>> 72 spitfire mkIV
>> east aurora, new york
>
>
>
>
|