Can anyone advise Tom on his problem? Please make sure you reply to him
at least (not to me). Thanks!
--Andy
* * * * * * * * * * * * * * * * * * * * * * *
* Andrew Mace, President and *
* 10/Herald/Vitesse (Sports 6) Consultant *
* Vintage Triumph Register <www.vtr.org> *
* amace@unix2.nysed.gov *
* * * * * * * * * * * * * * * * * * * * * * *
On Sat, 5 Jun 1999 TFarrow757@aol.com wrote:
> I have rebuilt a 1975 Triumph Spitfire, but now I need to get it to pass
> Colorado Emissions. I came close, but not enough. Can you tell me what I need
> to adjust to reduce the hydrocarbon reading at idle.
> The readings are very good at high speed, but idle is about 1200 for
> hydrocarbon and 0.14 for CO. The high speed reading is 226 for hydrocarbon
> and 0.31 for CO.
> Just how do I reduce the reading at idle please let me know so that I can
> enjoy the fruits of my labor.
> Sincerely,
> Tom Farrow
>
|