Ray,
I recently went thru the same swap and had the same result. Two extra
wires close to the front of the gearbox that came from a switch on the 3
rail. I never connected them an have not had any problems. I do not
however know what they go to. Anyone else know?
David Gates
At 10:54 PM 3/14/99 -0500, you wrote:
>
>Hi y'all,
>I just replaced my 3 rail with a single rail gearbox and I noticed that my
>old tranny had 2 switches on it. One was the reverse light switch and the
>other seemed to be useless. It was on the top front close to the rail. It
>looked like it might have something to do with an overdrive but I didn't
>have an overdrive. Anyway, I don't know what to do with the wires since I
>only have the reverse light switch on the newer tranny. Does anybody know
>what that switch was for and what I should do with the wires?
>
>Also, if anybody wrote to me about the old tranny, you might want to send
>it again because I seemed to to trashed all of my mail by accident.
>Ray
>
>**********************************************************************
>Ray Bryant
>Keller, Texas
>'73 Spitfire 1500 (FM6879U), Daily driver
>Red River Triumph Club http://www.imagin.net/~hensley/rrtc.html
>Bryant Studios Photography http://www.flash.net/~photoray
>**********************************************************************
>
>
>
|