Chris,
I use one of those pads that chuck into a drill. It is manufactured by
3M and is similar to a Scotch-Brite Pad only more abrasive. It also
works well for removing rust and paint from parts.
You can also use one of those wire brush wheels that will mount in a
portable electric drill.
Regards,
Joe
Chris Pappathopoulos wrote:
>
> > Does anyone have any suggestions on how to remove gasket material that has
>stuck to
> > the engine pieces. I'm particularly concerned with the pieces of the head
>gasket
> > that stuck to the block. I don't really want to have to scrape that area and
> > scratch up the top of the block.
>
> Thank you for any information anyone has to give.
>
> Chris Pappathopoulos
> 74 Spitfire 1500
--
"If you can't excel with talent, triumph with effort."
-- Dave Weinbaum in National Enquirer
|