You need to separate the transmission from the engine first. Take the tranny
out of the car, leaving the torque converter bolted to
the flexplate. Then you will be able to easily use a socket and ratchet to
remove the bolts.
Bob
-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net] On
Behalf Of Bob
Sent: Wednesday, July 19, 2006 12:33 PM
To: Shotimes@autox.team.net
Subject: [Shotimes] Torque Converter to Flexplate Nuts
How do I get them off?
I'm unable to get a socket on them, and I can tell an open ended wrench would
tear them up. I started modifying a box wrench, but
there's not enough curve at the box end to clear the bellhousing.
-- Bob
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
|