BTW, Gen 3 wheels are 16x6.5", versus 16x6" for slicers.
Ron Porter
-----Original Message-----
From: shotimes-admin@autox.team.net [mailto:shotimes-admin@autox.team.net]
On Behalf Of bjshov8
Sent: Monday, May 01, 2006 10:02 PM
To: shotimes@autox.team.net
Subject: Re: [Shotimes] 205 or 225?
I've always wondered about tire width vs. rim width. In the days before
radials you wanted a min. rim width almost as wide as the tread, but I think
this is a bit less critical with radials. If you buy into the argument
about rim width affecting performance, then you might be as well off with
205's.
I'm driving a gen3 now and I think its stock wheels are wider than slicers.
I had AVS db s2's on it, and replaced them with Fuzion ZRi's. I noticed
that the Fuzions are much more responsive in turn-in so they must have
stiffer sidewalls. I don't notice much difference in ride though.
> Hey guys, I'm looking at these Fuzion tires and notice that they only
> come in 205 or 225 widths, not 215... I have 225/55s on right now (AVS
> dB2) and they look like they're friggin' pregnant they bulge out so far
> on stock slicers.
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
_______________________________________________
Shotimes mailing list
Shotimes@autox.team.net
http://www.team.net/mailman/listinfo/shotimes
|