shop-talk
[Top] [All Lists]

[Shop-talk] Frozen sway-bar slider

To: Shop-Talk <shop-talk@autox.team.net>, lotus-cars@autox.team.net, british-cars@autox.team.net
Subject: [Shop-talk] Frozen sway-bar slider
From: Philip Ethier <pethier7@gmail.com>
Date: Mon, 16 Sep 2024 12:46:59 -0500
Delivered-to: mharc@autox.team.net
Delivered-to: shop-talk@autox.team.net
--===============6201678986911054982==

--00000000000012b54c0622402bb7

Saturday I ran a small-lot autocross at a dragstrip near Rock Falls
Wisconsin.  My Caterham was pushing a bit and I had trouble staying in the
power band in second gear.

Also, there is a light clicky sound when I drive over bumps on the street.

The click is probably the rear sway-bar moving sideways and hitting the
hose clamps that locate it in its aluminum-block brackets.  First shot at
quieting it is to put in a couple of cable ties between the clamps and the
blocks.  If that does not do it I will slit some PEX.

Next, adjust the rear bar stiffer.  Problem:  I have removed all the
fasteners and the blocks will not move.  The Heim joints pulled out OK.  I
swung the bar down.  It moves very easily.  I shot the blocks with Kroil,
smacked them with a wrench and stopped for lunch. At least if I need to use
heat, the part is far from anything to damage.

https://www.flickr.com/photos/pethier/54000198064

--00000000000012b54c0622402bb7
Content-Transfer-Encoding: quoted-printable

<div dir=3D"ltr"><div class=3D"gmail_default" style=3D"font-family:monospac=
e">Saturday I ran a small-lot autocross at a dragstrip near Rock Falls Wisc=
onsin.=C2=A0 My Caterham was pushing a bit and I had trouble staying in the=
 power band in second gear.<br><br>Also, there is a light clicky sound when=
 I drive over bumps on the street.<br><br>The click is probably the rear sw=
ay-bar moving sideways and hitting the hose clamps that locate it in its al=
uminum-block brackets.=C2=A0 First shot at quieting it is to put in a coupl=
e of cable ties between the clamps and the blocks.=C2=A0 If that does not d=
o it I will slit some PEX.<br><br>Next, adjust the rear bar stiffer.=C2=A0 =
Problem: =C2=A0I have removed all the fasteners and the blocks will not mov=
e.=C2=A0 The Heim joints pulled out OK.=C2=A0 I swung the bar down.=C2=A0 I=
t moves very easily.=C2=A0 I shot the blocks with Kroil, smacked them with =
a wrench and stopped for lunch. At least if I need to use heat, the part is=
 far from anything to damage.</div><div class=3D"gmail_default" style=3D"fo=
nt-family:monospace"><br></div><div class=3D"gmail_default" style=3D"font-f=
amily:monospace"><a href=3D"https://www.flickr.com/photos/pethier/540001980=
64">https://www.flickr.com/photos/pethier/54000198064</a><br></div></div>

--00000000000012b54c0622402bb7--

--===============6201678986911054982==
Content-Transfer-Encoding: 7bit
Content-Disposition: inline

_______________________________________________

Shop-talk@autox.team.net
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive



--===============6201678986911054982==--

<Prev in Thread] Current Thread [Next in Thread>