Cast iron can be welded, but it's tricky, requires a welder with
experience doing it and usually the piece needs careful preheating (I
doubt you'll find a good welder who would even attempt it). Tell
daughter and her boyfriend the manifold/furnace has to be fixed--or
replaced if not possible--before any other 'upgrades' to the house. If
you're able, offer some financial assistance to get it done. In some
areas, (I think) the guy who applied the 'goop' could be prosecuted if
the inevitable happens.
re: "She has a CO2 detector in the basement"--presume you mean 'CO,' or
carbon monoxide, which is what could kill your daughter.
Bob
On 11/8/2021 7:39 AM, Jim Stone wrote:
> My daughter and her boyfriend have bought a turn of the century house
> with an ancient coal-fired furnace that was long ago converted to
> natural gas. Â It works fine and theyâ??d like to put off replacing it
> for as long as possible while they invest their money in other parts
> of the house. Â However, the furnace has a cast iron exhaust manifold
> that is cracked pretty badly and it scares the hell out of me.
> Â Following are some screenshots from a video she sent me, starting
> with the overall exhaust.
>
>
>
> You can see the top of the manifold in the lower right. Â Here is a
> side view:
>
>
>
> The orange goop was applied by a furnace tech they hired, who said he
> really shouldnâ??t have touched it at all but did what he could.l.
> However, here is a shot just below the goop:
>
>
>
> And, a shot from the other side:
>
>
>
> As you can see - assuming the photos come through - the manifold is
> totally shot, although it feels solid and doesnâ??t appear to be in
> danger of falling off. Â In theory, it could be removed and taken
> someplace that does cast iron welding, but I suspect that would be a
> royal pain and not guaranteed to succeed. Â She has a CO2 detector in
> the basement, but I will be visiting her next week and want to try to
> do more. Â â??Moreâ?? might be trying to convince them to bite the bullet
> and replace the system immediately, but I have also thought about
> treating it like an automotive exhaust system and trying to patch it
> to get them by for a season or two. Â What are the group's thoughts on
> something like JB Weld High Heat putty
> (https://www.amazon.com/J-B-Weld-8297-HighHeat-Degree/dp/B007PP26RI/ref=pd_bxgy_2/138-6104268-8394138?pd_rd_w=nQ3PU&pf_rd_p=c64372fa-c41c-422e-990d-9e034f73989b&pf_rd_r=2F076DNFFJBZ1G9PK3TY&pd_rd_r=623d1e00-f712-4380-897c-474fe9ee6337&pd_rd_wg=1YSqH&pd_rd_i=B007PP26RI&psc=1
>
> <https://www.amazon.com/J-B-Weld-8297-HighHeat-Degree/dp/B007PP26RI/ref=pd_bxgy_2/138-6104268-8394138?pd_rd_w=nQ3PU&pf_rd_p=c64372fa-c41c-422e-990d-9e034f73989b&pf_rd_r=2F076DNFFJBZ1G9PK3TY&pd_rd_r=623d1e00-f712-4380-897c-474fe9ee6337&pd_rd_wg=1YSqH&pd_rd_i=B007PP26RI&psc=1>)
>
> and/or their high heat wrap
> (https://www.amazon.com/dp/B00N582CBY/ref=emc_b_5_t)?
>
> Thanks,
> Jim (and Sara)
>
>
>
>
>
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/mharc@autox.team.net
|