On 5/31/2019 11:18 AM, John Innis via Shop-talk wrote:
> This looks like a shortcut on the part of the mfgr. I have seen nuts
> where the threaded hole is bolonged a bit to create tension to assist
> with self locking, but all of those I have seen has a perfect hex.
To add to that, in all the stover nuts I've seen, the distortion is only
in the upper part of the nut, not the full thread--otherwise, it could
not be installed without difficulty or chance of cross-threading.
Pitch `em. They're junk.
Cheers.
--
Michael Porter
Roswell, NM
Never let anyone drive you crazy when you know it's within walking distance....
_______________________________________________
Shop-talk@autox.team.net
Donate: http://www.team.net/donate.html
Suggested annual donation $12.96
Archive: http://www.team.net/pipermail/shop-talk http://autox.team.net/archive
Unsubscribe/Manage:
http://autox.team.net/mailman/options/shop-talk/mharc@autox.team.net
|