Just go to the BORG or hardware store. Find a quick disconnect fitting
the same style as your hose uses. It'll be threaded on the other end,
either male or female. Take it to the plumbing department and tell the
guy there you need a 3 foot (or so) piece of 1/4" black or galvanized
pipe and a fitting to screw THIS (show him the air fitting) on the end.
Screw together. Done.
On 7/20/2014 3:47 PM, Mike wrote:
> When I worked in a factory, some mechanics had an extension for the air hose.
> Basically a piece of pipe/conduit, with a quick disconnect on one end, all
> about 3 feet long. Great for blowing down an area. Is this something I can
> purchase, or is it something that must be cobbled up, maybe by brazing a
> fitting on the end of a pipe/conduit? I looked at HF, but didn't find
> anything. I don't really have the equipment to make one.
>
> Mike
> _______________________________________________
>
> Shop-talk@autox.team.net
> Donate: http://www.team.net/donate.html
> Suggested annual donation $12.96
> Archive: http://www.team.net/archive
> Forums: http://www.team.net/forums
> Unsubscribe/Manage:
> http://autox.team.net/mailman/options/shop-talk/cavanadd@frontier.com
_______________________________________________
Shop-talk@autox.team.net
Archive: http://www.team.net/archive
|